An ideal solution where a high quality, economical partitioning system is required for manufacturing and storage areas.

 

Specification

Panels are constructed from 43 x 43 x 1.2 mm (18g) cold-rolled angles and 32 x 32 x 0.7 mm (22g) cold-rolled T bars with 0.8 mm (21g) CR4 mild steel or 50 x 50 x 3 mm (10g) weldmesh sheets, spot-welded into the framework.

 

Standard panel sizes

Height:   2400, 2700, 3000 mm
Width:  1000 mm
Dado Height:  1200 mm
Thickness:  43mm
A range of infill and special size panels can be supplied to maintain final dimensions.

 

Mullion sizes

50 x 50 x 2.5 mm - up to 2700 mm high
80 x 40 x 2.5 mm - 2700 mm and above
100 x 50 x 3.0 mm - to suit installation.
All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength, e.g. on clear access doors.

 

Standard Door Module Sizes:  Steel or  Timber

Side Hung Doors:   Height 2022 mm width 1000 mm*
Double Doors:  Height 2022 mm width 1940 mm*
Sliding Doors:  To suit customer's requirements
*Plus overpanel to partition height

Doors can be supplied with or without vision panels.  A full range of non-standard door types, i.e. full height leaves, clear access modules or hospital type leaves are available to order.

 

Glazing

A two-piece glazing system that can accommodate 4 mm to 6.4 mm glass, is supplied in 1828 mm and 2440 mm lengths to be cut and fitted on site.  6 mm toughened, 6.4 mm laminated and 6 mm Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

 

Paint Finish

All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.

 

Please contact us on 01661 853198 to discuss your particular requirements with one of our engineers.

There are yet no reviews for this product.
Please log in to write a review.